Concentrated forces on beams to AISC 360-22 J10
Beams under concentrated loads, hangers and moment-frame flange forces: flange bending, web yielding, crippling and buckling, panel-zone shear, with stiffeners and web doublers when needed (AISC 360-22 J10).
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished concentrated forces on beams calculation
The applicable checks, step by step
Every check to AISC 360-22 J10 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the concentrated forces on beams is tested
Against published examples and hand calculations from the code equations, on every change. The method and the sources.
Learn
Step by step
User manual: Concentrated forces on beams
Every input, check and option of the calculation explained.
Video: Steel: a floor beam
A W18X40 floor beam with braces at the third points: the checks, the steps, auto-design and what the calculation leaves to you. (1:45)
More steel calculations
Run your next concentrated forces on beams calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.